Contact us
Contact us
  • Tel:+86-577-67470303
  • Fax:+86-577-67410975
  • Email:[email protected]
  • Address:212 Jiaoxia Rd Anfeng Industry area, Oubei Town, Yongjia County, Wenzhou, Zhejiang, China 325106
The current position:Home > Production casting machine series > High temperature tape casting machine DL-LYJ-6SE520H
High temperature tape casting machine DL-LYJ-6SE520H
  • High temperature tape casting machine DL-LYJ-6SE520H

  • product description
  • Product Brief

     DL-6SE520H high temperature casting machine adopts advanced servo knife adjustment, servo tension, fast deviation correction, and high efficiency drying system, making them very suitable for 5-800um ceramic belt production. The whole process from feeding to green roll winding is highly automated.

    technical parameter

    1) Equipment specifications: 8000*1250*2000mm (length*width*height)

    2) Material of carrier tape: PET film (38-188um)

    3) Casting width: 520mm

    4) Casting speed: 0.02-3.0 (M/min)

    5) Scraper height: 5~4500μm

    6) Thickness of porcelain tape: 20-800um

    7) Knife adjustment accuracy: 0.001mm

    8) Knife adjustment control: motor plus ball screw (China T8*2) with electronic dial gauge (Taiwan EEE) closed-loop control

    9) Thickness accuracy: ±(1um+2% with thickness)

    10) Baseboard control temperature: room temperature ~ 350-450°C (±1°C)

    11) Dry area:

    The first zone ------ 1 meter in length, with floor heating, the maximum temperature is 350 degrees (± 1 ℃)

                             The maximum circulating temperature in the oven is 350 degrees

    The second zone ------ 1 meter in length, plus floor heating, the maximum temperature is 350 degrees (± 1 ℃)


                         The maximum circulating temperature in the oven is 350 degrees

    The third zone ------ 1 meter in length, plus floor heating, the maximum temperature is 350 degrees (± 1 ℃)


                              The maximum circulating temperature in the oven is 350 degrees

    The fourth zone ------ 1 meter in length, with floor heating, the maximum temperature is 450 degrees (±1℃)

                         The maximum circulating temperature in the oven is 450 degrees

    Fifth zone ------ 1 meter in length, plus floor heating, maximum temperature 450 degrees (±1℃)

                         The maximum circulating temperature in the oven is 450 degrees

    ● One zone of hot air circulation----Proportional circulation control with a length of 3 meters, adjusting the air outlet, inlet air and circulation ratio adjustment, the air volume is up to 600M3/h, and the temperature setting is up to 350 degrees (±1℃).

    ● The second zone of hot air circulation----Proportional circulation control with a length of 2 meters, adjust the air outlet, inlet air, circulation ratio adjustment, the air volume is up to 600M3/h, and the temperature setting is up to 450 degrees (±1℃).

    12) Automatic feeding system: fully automatic feeding, using feeding throat, PID control flow, control accuracy ±0.1mm

    13) Liquid level height: 0-40.0mm

    14) Porcelain belt trimming and slitting: imported alloy steel blade (customized by blade manufacturer)

    15) Electrostatic dust removal: 4 sets of products (China KESD) KE-60X

    16) Tension control: the servo motor (Japan Panasonic MHMF082L1U2M/MCDLN35SE) controls the tension, and the baseband runs without fluctuation

    Working voltage: 380V 50/60HZ

    Product Brief

     DL-6SE520H high temperature casting machine adopts advanced servo knife adjustment, servo tension, fast deviation correction, and high efficiency drying system, making them very suitable for 5-800um ceramic belt production. The whole process from feeding to green roll winding is highly automated.

    technical parameter

    1) Equipment specifications: 8000*1250*2000mm (length*width*height)

    2) Material of carrier tape: PET film (38-188um)

    3) Casting width: 520mm

    4) Casting speed: 0.02-3.0 (M/min)

    5) Scraper height: 5~4500μm

    6) Thickness of porcelain tape: 20-800um

    7) Knife adjustment accuracy: 0.001mm

    8) Knife adjustment control: motor plus ball screw (China T8*2) with electronic dial gauge (Taiwan EEE) closed-loop control

    9) Thickness accuracy: ±(1um+2% with thickness)

    10) Baseboard control temperature: room temperature ~ 350-450°C (±1°C)

    11) Dry area:

    The first zone ------ 1 meter in length, with floor heating, the maximum temperature is 350 degrees (± 1 ℃)

                             The maximum circulating temperature in the oven is 350 degrees

    The second zone ------ 1 meter in length, plus floor heating, the maximum temperature is 350 degrees (± 1 ℃)


                         The maximum circulating temperature in the oven is 350 degrees

    The third zone ------ 1 meter in length, plus floor heating, the maximum temperature is 350 degrees (± 1 ℃)


                              The maximum circulating temperature in the oven is 350 degrees

    The fourth zone ------ 1 meter in length, with floor heating, the maximum temperature is 450 degrees (±1℃)

                         The maximum circulating temperature in the oven is 450 degrees

    Fifth zone ------ 1 meter in length, plus floor heating, maximum temperature 450 degrees (±1℃)

                         The maximum circulating temperature in the oven is 450 degrees

    ● One zone of hot air circulation----Proportional circulation control with a length of 3 meters, adjusting the air outlet, inlet air and circulation ratio adjustment, the air volume is up to 600M3/h, and the temperature setting is up to 350 degrees (±1℃).

    ● The second zone of hot air circulation----Proportional circulation control with a length of 2 meters, adjust the air outlet, inlet air, circulation ratio adjustment, the air volume is up to 600M3/h, and the temperature setting is up to 450 degrees (±1℃).

    12) Automatic feeding system: fully automatic feeding, using feeding throat, PID control flow, control accuracy ±0.1mm

    13) Liquid level height: 0-40.0mm

    14) Porcelain belt trimming and slitting: imported alloy steel blade (customized by blade manufacturer)

    15) Electrostatic dust removal: 4 sets of products (China KESD) KE-60X

    16) Tension control: the servo motor (Japan Panasonic MHMF082L1U2M/MCDLN35SE) controls the tension, and the baseband runs without fluctuation

    Working voltage: 380V 50/60HZ

Copyright © DRON Technology- Eqiupment